Opening Hours : Monday to Saturday - 8am to 5pm
                点击这里给我发消息
EMAIL
jxdz@j-xing.com
CallNow
+86 13702371631
FAQ
  • Q: How to pick the wireless doorbells?
    A: With any聽wireless doorbell聽system, there are a variety of options to consider with regards to picking the correct system for your needs. The most important are: the range of the unit, the distance between the system's individual elements, and what type of obstacles are between the sending units and receiving units. When considering which wireless doorbell system is the most appropriate for your location, you will want to begin with considering the distance between the chimes and push buttons, and select a system that has a greater range than you actually need. At this point, it is wise to take into account what obstacles are between the individual units. Objects like dense trees, walls, buildings, and hills will cut down the range of these products. This is very important, because most homes or businesses have at least one wall between the units. Here is a good estimate: an average exterior wall can reduce the range by 30%. A stucco, concrete or brick wall may decrease the range by as much as 50-70%. A metal wall may even block a wireless signal completely.

  • Q: Can wireless doorbell wear wall?
    A: Can wireless doorbell wear wall? Many clients are focusing on this topic! Here, we will make a corresponding reply: Since wireless doorbell is using wireless technology, it鈥檚 vulnerable to external object interference in the signal transmission process. But now to wireless doorbell manufacturers, this is already not a problem. At present, we all products adopt the high frequency technology. In open distance, it can reach 300 meters range. In the 100 - meter range, it also completely no problem penetrating through three to four plugging mud wall.

  • Q: What is the advantage of wireless doorbell?
    A: A wireless doorbell eliminates the need for internal wiring, can be installed with minimal tools, and the chime box receiver can be placed anywhere within the range of the doorbell transmitter.

  • Q: How to install a wireless doorbell?
    A: Installing a wireless doorbell system is a relatively simple project for a homeowner or renter. The transmitter doorbell can be attached to the front door with two-sided tape or through the installation of a few screws provided with the system. It is not necessary to remove an old wired doorbell system or connect any wires to the transmitter. Most wireless doorbell transmitters are battery powered, which means the owner may have to replace the batteries periodically.

  • Q:How to Troubleshoot a Wireless Doorbell ?
    A:1.Check the batteries. You can either put the batteries in another device to see if they work, or you can just put fresh batteries in the聽doorbell聽and test it. 2.Move the doorbell receiver closer to the button. If they are too far away from each other, the signal won't reach and the chime won't sound. 3.Separate the doorbell button from metal surfaces to prevent metal interference by placing wood between the button and the metal frame. You can purchase wooden shims perfect for this at your local hardware store. 4.Replace your doorbell if it has been left out in or exposed to severe weather.
  •  

     

     

    Copyright 漏 1998 - 2017 Zhongshan J-XING Electrical Co.,Ltd.